Skip to content
Save 10% or $140 + on New UNITRONIC ECU and TCU Tunes*
Save 10% or $140 + on New UNITRONIC ECU and TCU Tunes*
STREET COILOVER KIT | AUDI A6 C7

STREET COILOVER KIT | AUDI A6 C7

by MTS TECHNIK
$2,190.00
This product is ready to order. Orders will have an estimated 2-week lead time.

Coilover Kit Audi A6 C7 Kombi

Coilover Kit MTS Technik for Audi A6 C7 Kombi, lowering both axles between 15 - 70 mm. Dedicated for the years of: 05/11 - 09/18, for the engine version: 1.8TFSI / 2.0TFSI / 2.8FSI / 3.0TFSI / 2.0TDI / 3.0TDI.

2 years warranty 2 year warranty with no mileage limit to confirm high quality.
High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
hexaCOIL adjustable spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Anti-corrosion protection yellow galvanized Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.
CAR:
Make
Audi
Model
A6 C7 Kombi
Type
4G5
Engine
1.8TFSI / 2.0TFSI / 2.8FSI / 3.0TFSI / 2.0TDI / 3.0TDI
Year
05/11 - 09/18
TECH SPECS:
Series: street
Max. Axle Load FA:
1081 - 1245 kg
Max. Axle Load RA:
-1365 kg
Lowering FA:
15 - 70 mm
Lowering RA:
15 - 70 mm
Camber / top mount FA:
no
Camber / top mount RA:
no
Coilover Main Spring (Front):
Spring rate (120 N/mm)
Coilover Helper Spring (Front):
Spring rate (20 N/mm)
Coilover Main Spring (Rear):
Spring rate (26,25 - 62 N/mm)
TUV Certificate:
yes
Download information brochure: Download information brochure
Download installation manual: Download installation manual
Download TUV Certificate: Download TUV Certificate
PRODUCT NOTES
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
35 - Rear thread adjustment block is mounted on the top.
39 - 

Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.

73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.