AFTERMARKET PARTS

You've got the parts. now get the gear. These are our SNAP-BACK U-FLEX Flat Peak hats which are available in a range of colours.- 6 Panel Structure...

Our Haldex oil filter wrench makes servicing your Haldex that much easier.With a satin finish for durability against corrosion, wear and tear, this...

HARRYS EURO ASSEMBLED HALDEX SERVICE KITService your Haldex and keep it workng like the factory intended. This is the complete kit to service your ...

HARRYS EURO ASSEMBLED HALDEX SERVICE KIT GEN 4Service your Haldex and keep it workng like the factory intended. This is the complete kit to service...

If you are the owner of a 1.8T , 2.7T or V6 powered car and you're experiencing misfires then upgrade to these coil packs. Brand: HARRYS EURO Produ...

Our HARRYS EURO LOGO DECAL clean, simple and available in two colours.Just got parts from HE? Show the world by placing these on your car, tool box...

Keep your VAG 2.0 TSI engine running smoothly with our HARRYS EURO Assembled Oil Service Kit for the EA888 engine.CAPACITY 5.7LKit includes:1 X LIQ...

High Performance replacement air filter -fits 70mm / 2.75 Inch intake tubes

HARRYS EURO assembled Brembo 6-Pot Brake upgradeComprising of:Repainted Z18 Brembo 6 Pot CalipersNew HardwareNew PadsNew DiscsNew HEL Braided Lines...

Just got parts from HE? Show the world by placing these on your car, tool box, cellphone cover, laptop or ANYWHERE else your heart desires.   Dimen...

Everyone knows that servicing time is important. Ensure you extend the life of your European pride and Joy with our new service reminder decals. Th...

Time to lower your car? then youll need one of these!   

The HARRYS EURO Turbo Inlet Pipe is an easy-to-install bolt-on upgrade that eliminates the restriction before the turbocharger. It’s larger than st...

The right tool is always a must. Save yourself the hassle and frustration when removing VAG connectors. The HARRYS EURO VAG CONNECTOR TOOL fits snu...

Longer, lighter and easier to use, our aluminum wheel hanger makes it easy to remove and install wheels. Thread the hanger stud into a wheel bolt h...

VW has encountered a problem with the FSI camshaft and cam follower that could lead to damage to your engine's cylinder head. This small part can ...

Tuneable engine mounts to suit your driving demands. This mount fits 6-cyl models only except the E46 Xi and Convertible models, and for the E9* it...

You have the mounts, now get the decal!   3 SIZES AVAILABLE38MM x 180mm60MM x 300mm120MM x 600mm

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn r...

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn r...

POWERFLEX FRONT ANTI ROLL BAR LINK BUSH KIT | PFF85-412 Fits aluminium link rods only, for plastic link rods use PFF85-413. Not for link rods with...

POWERFLEX FRONT ANTI ROLL BAR MOUNT 21MM | PFF85-411-21 Please check anti roll bar diameter before ordering. OEM Part Number: 1J0411314T

This bush allows +/- 0.75 degrees of camber adjustment. For a non adjustable bush use PFF85-1301.Brand: POWERFLEXProduct Nr: PFR85-1301GMADE IN THE...

POWERFLEX FRONT ENGINE MOUNT DOG BONE | PFF85-420OEM Part Number: 1J0199851

FRONT LOWER RADIUS ARM TO CHASSIS BUSH PFF3-802 This part suits arms with a 65mm diameter bush, for 75mm bushes please use PFF3-702. This is a re...

Powerflex is the number one selling suspension bushing manufacturer in Europe. Their experience with polyurethane bushing material and state-of-the...

POWERFLEX FRONT SUBFRAME REAR BUSH | PFF85-424 OEM Part Number: 1J0199429 OEM Part Number: 8N0199282C OEM Part Number: 8N0199282D

Brand: POWERFLEXProduct Nr: PFF19-1225BLKMADE IN THE U.K This part fits as an insert for the Front Upper Right Engine Mount. The rubber on the ori...

This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0...

For a camber adjustable bush use PFF85-501G. Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Rubber b...

POWERFLEX FRONT WISHBONE FRONT BUSH | PFF85-201 If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with...

Increasing the caster angle gives better steering response and steering wheel returnablility.  This angle is not really adjustable from the factory...

Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Rubber bushings are used from the factory to create a ...

POWERFLEX FRONT WISHBONE REAR BUSH | PFF85-410 Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21...

Brand: POWERFLEXProduct Nr: PFF19-1226BLKMADE IN THE U.K  This part fits as an insert for the Gearbox Mount. The rubber on the original mounts deg...

The ultimate handling pack for your Golf MK4 R32! Included within this handling pack are the following parts:PFF3-501 Front Wishbone Front Bush PF...

The ultimate handling pack for your Golf! VW GOLF MK3 2WD , VR6 GTI ETC  Included within this pack are the following parts:PFF85-201 Front Wishbo...

PF3-1661 is a polyurethane jack pad to fit around and protect the sill, designed to help lift stability and location, whilst protecting the undersi...

PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget ...

Suitable for higher powered cars and track cars, using a stiffer material which helps further reduce engine movement over fitting the standard PFF8...