cart-icon Skip to content
⚠️Limited Edition EuroCalss 2025 T shirts now Available ⚠️
⚠️Limited Edition EuroCalss 2025 T shirts now Available ⚠️
STREET COILOVER KIT | WITH CAMBER PLATES | MK5 GTI

STREET COILOVER KIT | WITH CAMBER PLATES | MK5 GTI

by MTS TECHNIK
$2,290.00
This product is ready to order. Orders will have an estimated 2-week lead time.

Coilover Kit Volkswagen Golf V Hatchback

Coilover Kit MTS Technik for Volkswagen Golf V Hatchback, lowering the front axle between 35 - 70 mm, and rear between 35 - 60 mm. Dedicated for the years of: 10/03 - 07/10, for the engine version: 2.0FSI 4motion/ 3.2 R32 4motion / 1.9TDI 4motion / 2.0TDI 4motion.

2 years warranty 2 year warranty with no mileage limit to confirm high quality.
High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Top mounts with camber adjustment The camber plates allow the wheel angle adjustment and increase the precision of driving.
hexaCOIL adjustable spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Anti-corrosion protection yellow galvanized Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.
CAR:
Make
Volkswagen
Model
Golf V Hatchback
Type
1K1
Engine
2.0FSI 4motion/ 3.2 R32 4motion / 1.9TDI 4motion / 2.0TDI 4motion
Year
10/03 - 07/10
TECH SPECS:
Series: street
Housing:
gold
Max. Axle Load FA:
1036 - 1170 kg
Max. Axle Load RA:
-1150 kg
Lowering FA:
35 - 70 mm
Lowering RA:
35 - 60 mm
Camber / top mount FA:
yes
Camber / top mount RA:
no
Coilover Main Spring (Front):
Spring rate (34 - 40 - 70 N/mm)
Coilover Main Spring (Rear):
Spring rate (43,6 N/mm)
TUV Certificate:
no
Download information brochure: Download information brochure
Download installation manual: Download installation manual
PRODUCT NOTES
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
25 - In some cases it might be necessary to dismount the rear adjustment to achieve the maximum lowering.
35 - Rear thread adjustment block is mounted on the top.
39 - 

Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.

73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.