034Motorsport 2.0T Gen 3 (IS20) Performance Software, 8V Audi A3 & MkVII Volkswagen GTI
Product Description:
034Motorsport is proud to unveil an all-new line of Performance Software for 8V Audi A3 & MkVII Volkswagen GTI models equipped with the EA888 Gen 3 2.0T engine and IS20 turbocharger! Flashed directly through your vehicle OBD-II port, 034Motorsport's proprietary calibrations for the Simos 18 ECU safely and effectively increase the power output of the 2.0T Gen 3 engine. The result is a noticeable improvement in acceleration and throttle response, without any sacrifice in driveability or reliability. 034Motorsport's 2.0T Gen 3 Performance Software was developed entirely in-house on 034Motorsport's Development MkVII Volkswagen GTI. The calibrations were then further refined on multiple enthusiast-owned Audi 8V A3 and Volkswagen MkVII GTI vehicles before release.
Software Features
034Motorsport EA888 2.0T Gen 3 Performance Software Comparison
STAGE | FUEL | MAX HP | MAX TQ | MAX HP GAIN | MAX TQ GAIN | REV LIMITER | SPEED LIMITER |
---|---|---|---|---|---|---|---|
Stock | 91 Oct | 231 HP | 271 TQ | NA | NA | 6,800 RPM | 150 MPH |
Stage 1 | 91 Oct | 294 HP | 334 TQ | 69 HP @ 5,750 RPM | 66 TQ @ 3,250 RPM | 7,000 RPM | ∞ |
Stage 1 | 93 Oct | 303 HP | 341 TQ | 76 HP @ 5,404 RPM | 81 TQ @ 4,548 RPM | 7,000 RPM | ∞ |
Stage 2 | 91 Oct | 302 HP | 341 TQ | 75 HP @ 5,750 RPM | 84 TQ @ 2,250 RPM | 7,100 RPM | ∞ |
034Motorsport EA888 2.0T Gen 3 Performance Software Stage Descriptions
Stage 1
034Motorsport Stage 1 Performance Software for the EA888 Gen 3 2.0 TSI/TFSI engine is engineered to safely increase horsepower and torque with no hardware modifications required. 034Motorsport's proprietary calibrations increase boost while optimizing timing and fueling maps to extract additional power from the 2.0T engine.
Stage 1 Performance Software features a higher redline of 7,100 RPM, resulting in a broader, more usable powerband. In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in order to provide improved throttle response and allow for more precise throttle modulation and further control of the vehicle when driving on track.
Stage 2
034Motorsport Stage 2 Performance Software for the EA888 Gen 3 2.0 TSI/TFSI engine is engineered to further increase horsepower and torque with the addition of a high-flow downpipe upgrade and performance air intake. 034Motorsport's calibrations optimize the factory ECU for these hardware modifications in order to extract additional power from the 2.0T engine.
Stage 2 Performance Software features a higher redline of 7,100 RPM, resulting in a broader, more usable powerband. In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in order to provide improved throttle response and allow for more precise throttle modulation and allow for further control of the vehicle when driving on track. In addition, Stage 2 Peformance Software features a Crackle Overrun in Sport Mode, which produces nice pops and crackles from the exhaust during deceleration.
034Motorsport EA888 2.0T Gen 3 Performance Software Dyno Charts
Select Dyno Chart:
034Motorsport EA888 2.0T Gen 3 Performance Software Hardware Requirements
STAGE | FUEL | REQUIRED MODIFICATIONS | RECOMMENDED MODIFICATIONS |
---|---|---|---|
Stage 1 | 91 Oct | No hardware required | Intake, Intercooler, Res-X, DSG Software (if applicable) |
Stage 1 | 93 Oct | No hardware required | Intake, Intercooler, Res-X, DSG Software (if applicable) |
Stage 2 | 91 Oct | Downpipe, Intake | Intercooler, Res-X, DSG Software (if applicable) |
034Motorsport Dynamic+ End User Flashing Kit
034Motorsport's Dynamic+ End User Flashing Kit allows customers to install their 034Motorsport Dynamic+ Performance Software themselves. In addition, End User Flashing allows Dynamic+ Performance Software customers to receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software for their vehicle.
Requirements for End User Flashing:
- Windows 7 or Windows 10 Laptop with Available USB Port
- Power Supply for Laptop
- Secure Wired (Or Very Stable WiFi) High-Speed Internet Connection
- CTEK Trickle Charger (Or Similar)
- Available Electrical Outlets
034Motorsport End User Flashing Kit Contents:
- 034Motorsport OBD-II Adapter
- USB-A to USB-B Cable
- Carrying Case
- User Credentials (Provided Via Email)
EMISSIONS DISCLAIMER
- This product is sold for racing and off-road use only.
- This product is not CARB or EPA compliant, this product is not authorized for use in California on smog controlled vehicles.
- By purchasing this product, you understand this product is sold for competition use on closed roads and is not legal for use in highway or street vehicles.